Cypress FM0－64L－S6E1C3 MCU入门设计方案

Cypress公司的FM0-64L-S6E1C3系列是高读集成的32位MCU,设计用于低功耗和低成本的嵌入式控制器.器件具有集成了片上闪存和SRAM的ARMCortex-M0+处理器,还包含了各种定时器,ADC和各种通信接口（UART,CSIO(SPI),I2C,I2S,智能卡和USB）等在内的外设功能.工作频率高达40.8MHz.本文介绍了FM0-64L-S6E1C3系列产品主要特性,框图,以及FM0-64L-S6E1C3 MCU入门开发板主要特性和元件分布图,系统框图,电路图,材料清单和PCB设计文件.
The S6E1C3 Series is a series of highly integrated 32-bit microcontrollers designed for embedded controllers aiming at low powerconsumption and low cost. This series has the ARM Cortex-M0+ Processor with on-chip Flash memory and SRAM, and consists ofperipheral functions such as various timers, ADC and communication interfaces (UART, CSIO (SPI), I2C, I2S, Smart Card, and USB).
The products which are described in this data sheet are placed into TYPE3-M0+ product categories in "FM0+ Family PeripheralManual".
FM0-64L-S6E1C3主要特性:
32-bit ARM Cortex-M0+ Core
 Processor version: r0p1
 Maximum operating frequency: 40.8 MHz
 Nested Vectored Interrupt Controller (NVIC): 1 NMI(non-maskable interrupt) and 24 peripheral interrupt with 4selectable interrupt priority levels
 24-bit System timer (Sys Tick): System timer for OS taskmanagement
Bit Band Operation
Compatible with Cortex-M3 bit band operation.
On-Chip Memory
 Flash memory
 Up to 128 Kbytes
 Read cycle: 0 wait-cycle
 Security function for code protection
 SRAM
The on-chip SRAM of this series has one independent SRAM .
 Up to 16 Kbytes
 4Kbytes: can retain value in Deep standby Mode
USB Interface
USB interface is composed of Device and Host
With Main PLL, USB clock can be generated by multiplicationof Main clock.
 USB Device
 USB 2.0 Full-Speed supported
 Max 6 EndPoint supported
• EndPoint 0 is control transfer
• EndP...